TH-A5.1A.4

Design of 3D-Printed Air-Like Structural Supports for Meanderline Polarizers at L-Band

Songyi Yen, Gaeron R. Friedrichs, Ljubodrag Boskovic, Dejan Filipovic, University of Colorado Boulder, United States; Erik Lier, Tom Hand, Neill Kefauver, Lockheed Martin Space, United States
Session:
3D Printed Antennas and Structures
Track:
AP-S General Topics
Location:
Melati Ballroom 4102
Presentation Time:
Thu, 9 Dec, 09:20 - 09:40 Singapore Time (UTC +8)
Thu, 9 Dec, 02:20 - 02:40 France Time (UTC +1)
Thu, 9 Dec, 01:20 - 01:40 UTC
Wed, 8 Dec, 20:20 - 20:40 New York Time (UTC -5)
Session Co-Chairs:
Avinash Sharma, The Johns Hopkins University Applied Physics Laboratory and Yanghyo Kim, Stevens Institute of Technology
Session Manager:
Room R5 Manager
Presentation
Discussion
Resources
Session TH-A5.1A
TH-A5.1A.1: Low-Cost Circularly Polarized Millimeter-Wave Antenna using 3D Additive Manufacturing Dielectric Polarizer
Yazan Al-Alem, Yahia Antar, The Royal Military College of Canada, Canada; Syed Sifat, Ahmed Kishk, Concordia University, Canada; Gaozhi (George) Xiao, National Research Council of Canada, Canada
TH-A5.1A.2: 3D Printed Wideband Monopole Antennas
Kevin Leong, Evan Nguyen, Jesse Tice, Vesna Radisic, Northrop Grumman, United States
TH-A5.1A.3: 3D Metal Printed Broadband X-Band Septum Polarizer
Avinash Sharma, The Johns Hopkins University Applied Physics Laboratory, United States
TH-A5.1A.4: Design of 3D-Printed Air-Like Structural Supports for Meanderline Polarizers at L-Band
Songyi Yen, Gaeron R. Friedrichs, Ljubodrag Boskovic, Dejan Filipovic, University of Colorado Boulder, United States; Erik Lier, Tom Hand, Neill Kefauver, Lockheed Martin Space, United States
TH-A5.1A.5: On the Effect of Variable Thickness of Conductive Trace for 3D Printed Antennas
Sagar Hossain, Pratik Sinai K., Sayan Roy, South Dakota School of Mines & Technology, United States
TH-A5.1A.6: On the Manufacturing Process of a 3D Printed Patch Antenna with Variable Trace Height
Pratik Sinai K., Sagar Hossain, Sayan Roy, South Dakota School of Mines & Technology, United States
TH-A5.1A.7: On the Coupling Between a Transmission Line Additively Manufactured with Electrifi Filament and a Copper Stepped Impedance Filter in the S-Band
Henry Wolf, Dipankar Mitra, Ryan Striker, Jerika Cleveland, Benjamin Braaten, North Dakota State University, United States
TH-A5.1A.8: Aperture-Coupled Feed for Surface-Mounted Additively Manufactured Arrays
Brian Gibbons, R. Henry Tillman, Jason Jones, Michael Presley, Johns Hopkins Applied Physics Laboratory, United States
TH-A5.1A.9: On Changing the Phase of the Radiated Field from a Microstrip Patch Antenna Using a 3D-printed Conformal Metasurface
Ruisi Ge, Ryan Striker, Benjamin Braaten, North Dakota State University, United States
TH-A5.1A.10: Design Method for Bowtie Antenna with Enhanced Bandwidth and Controllable Gain Using 3D-Printing Technology
Milad Mirzaee, Yanghyo Kim, Stevens Institute of Technology, United States

Platinum Sponsor

Huawei

Gold Sponsors

Nano Dimension / AME Academy
TMYTEK

Bronze Sponsors

Microwave Vision Group
Spring Technologies
Dassault Systemes